Nylon is one of the most widely used and versatile thermoplastic resins. Its combination of physical properties versus its price makes it a favorite choice for numerous applications. Nylon has a consistent history of replacing other materials including: metal, brass, bronze, aluminum, and rubber. In replacing metal washers and spacers in machinery, nylon can be advantageous because of its ability to reduce noise, use less lubrication and increase gear life. Nylatron® MDS is an extruded “moly” filled nylon 6/6, which is gray in color. The addition of particles of molybdenum disulfide enhances the surface lubricity and wear resistance over unfilled nylon. In stamped washer and spacer applications requiring high lubricity, this material may be a good candidate. In addition to the greater lubricity there are many additional property enhancements that occur.
- Low surface friction
- Increased surface hardness
- Increased heat resistance
- Higher tensile properties
- Improved dimensional stability
TECAMID® MDS has enhanced properties which make it an ideal material to replace metals in machinery. It can increase the life of many moving parts as well as provide a noise reduction benefit and requires less lubrication. A very stable compound with many industrial applications.
We stock Nylatron in all thicknesses for stamping. On a custom basis it is made with glass reinforcement and additional heat stabilizer.
Nylatron is available in all thickness from .01 -.125 thick for stamping.
Go To Our Catalog To Find A Standard Size Washer And Request A Quote
| Properties | Condition | Value | Test Method | Comment | ||
|---|---|---|---|---|---|---|
| Mechanical | Modulus of elasticity (tensile test) | @ 73°F | 550,000 | psi | ASTM D 638 | |
| Tensile strength at yield | @ 73°F | 12,000 | psi | ASTM D 638 | ||
| Elongation at break | @ 73°F | 20 | % | ASTM D 638 | ||
| Flexural Strength | @ 73°F | 17,000 | psi | ASTM D 790 | ||
| Modulus of elasticity (flexural test) | @ 73°F | 500,000 | psi | ASTM D 790 | ||
| Compression strength | @ 1% strain | 1200 | % | ASTM D 695 | ||
| Compression strength | @ 10% strain | 14000 | % | ASTM D 695 | ||
| Impact strength (Izod) | @ 73°F | 1.2 | ft-lbs/in | ASTM D 256 | ||
| Rockwell hardness | M Scale | 87 | ASTM D 785 | |||
| Wear rate | Against Steel, 40 psi, 50 fpm | 1.9*10-8 | in3-min/ft-lbs-hr | ASTM D 3702 | ||
| Thermal | Melting temperature | 491 | °F | – | ||
| Deflection temperature | @ 66 psi | 470 | °F | ASTM D 648 | ||
| Deflection temperature | @ 264 psi | 194 | °F | ASTM D 648 | ||
| Service temperature | Intermittent | 355 | °F | – | ||
| Service temperature | Long term | 230 | °F | – | ||
| Thermal expansion (CLTE) | 4.0*10-5 | in/in/°F | ASTM D 696 1) | 1) Injection molded samples | ||
| Specific heat | 0.4 | BTU/lb-F° | – | |||
| Electrical | Volume resistivity | 1015 | ASTM D 257 | |||
| Dissipation strength | 30 | V/mil | ASTM D 149 | |||
| Dielectric constant | @ 60 Hz, 73 °F, 50% RH | 2.5 | ASTM D 150 | |||
| Other | Moisture absorption | @ 24 hrs, 73°F | 1.2 – 2.5 | % | ASTM D 570 | |
| Moisture absorption | @ saturation, 73°F | 7.5 – 8.5 | % | ASTM D 570 | ||
| Flammability (UL94) | HB | – | ||||
| This information is only to assist and advise you on current technical knowledge and is given without obligation or liability. All trade and patent rights should be observed. All rights reserved. Data obtained from extruded shapes material. TECAMID™ – Ensinger Industries, Inc. |
||||||